Granite Pavers $39.5 Per Metre Square

Granite Pavers – $39.50 per metre square

Melbourne Natural Stone Supplier Winter Special

Size: 800mmx400mm

Tile Thickness: 20mm

colour: Modena Dark

Tile Finish: Surface further treat for slip reistance

Pool coping tiles available with drop face edge.

Please contact Edwards Slate & Stone on 03 9544 9544.

Stone Paving DIY Made Easy

Stone Paving DIY Guide:

How to lay stone pavers on crushed rock and sand

Stone pavers which has exceptional thickness and guillotined edge, they can be used as paving stones, laid direct into soil, sand or in this case, we use traditional method where we put down some fine rock first, afterwards sand, then laid paving stones into them.

Step by step laying guide:

  • Site preparation: dig out existing substrate, allow 8-10 cm depth of crushed rock, afterwards sand, and paving stone on top of that.
  • Put in crushed rock.
  • Level the crushed rock.
  • A layer of sand on top, increase the flexibility of paving
  • Ready to lay pavers, method 1: Set the pavers to desired level. Method 2: Match the existing level of surrounding ground.
  • Half sized pavers available for stretch bond pattern.
  • I used a rubber mallet to tap the tile into the position & level it.
  • Sweep in the white-washed sand as the grout joint.

Final result is outstanding with minimal time and effort to complete, the advantages/benefits of this paving is environmental friendly, it is permeable paving solution for water penetrate into substrate, if you are a keen gardener, it’s easy to keep your plants grown and healthy.

Porcelain Tiles Granite 900x600x20 Marine Gris

Outdoor Porcelain Tiles Granite – Marine Gris

  • Best stone imitation porcelain, the final effect is close to nature.
  • European quality, manufactured to last.
  • Slip resistant, for safety.
  • 20mm thick, for high wear areas and exterior applications.
  • Can be laid on the “pod” system, for use on balconies and fast laying.
  • Can be laid with adhesive or mortar, for general landscaping projects.

Compare the best European quality stone imitation porcelain pavers with natural stone at the Edwards Slate & Stone showroom.

Turkey’s largest supplier of travertine is now producing “stone inspired” porcelain. The result is a manufactured product, with all its inherent benefits, that is close to nature’s original intention.

The Manufacturing plant uses the latest technology to duplicate the colour variation within natural stone, and even includes a slight surface variation within the tile which results in a more natural looking product.

We stock two sizes 600x600mm and 900x600mm in three colours. The reason for the large sizes is that natural stone becomes very expensive in large dimensions, while the porcelain does not, making the porcelain a very competitive option.

The porcelain paver is 20 mm thick which allows it to be used in the same way as stone and can be laid on driveways and used in heavy wear commercial areas and all domestic applications. In addition it can be laid in the traditional method of adhesive or using the “pod” system.

Being a manufactured product, porcelain has all the usual benefits i.e. does not require sealing, is highly salt resistant around pools, UV resistant and is easy to maintain.